Skip to main content

  • Updated
The image can be corrected to a brightness and color that is easy to observe.
 

4.2.1 Color Adjustment Procedure

1 On the right side of the screen, click Adjust Color to expand the parameters.

The list screen within CASE is displayed.

4.png

2 Adjust the color tone of the image by changing the parameters in the Adjust Color column.

5.png

６.png

Supplement

The color tone parameter settings are reset if you leave the page without saving.

 

4.2.2 Save color tone parameters

Allows you to save color tone parameter settings.

1 Enter the parameter name in the [enter record name] field under the [Adjust Color] field.

2 Sets whether or not the color tone parameters can be published in the Group.

[public]: Public in the Group. Other users will be able to select/edit/delete this parameter.

[private]: Not public in the Group.

3 Click the "Save" button.

The parameter names you set are displayed in the "Load Saved Color" column.

7.png

Supplement

Enter an existing color parameter name in the [enter record name] field and click the "Save" button to save it as a new setting with the same name.
Note that the parameter name cannot be changed after it has been saved, so be sure to save it under another name. (Click "Load Saved Color" to see if there are any other color parameter names with the same name.)

To delete a parameter with the same name, see Section "Deleting a Color Parameter".

To overwrite and save the color parameter settings, click the "Update" button.

 

4.2.3 Calling color tone parameters

Calls up color tone parameters.

1 Click in the "Load Saved Color" column.

Saved color tone parameters are displayed in a list.

2 On the right side of the screen, click "Adjust Color" to expand the parameters.

The list screen within CASE is displayed.

4.png

3 Select the name of the color tone parameter you want to use from the list.

Color tone parameters are applied to the image data.

8.png

9.png

Supplement

To reset the applied color tone parameters, click the "Reset" button.

To overwrite and save the settings of the recalled tonal parameters, click the "Update" button.

 

4.2.4 Deletion of color tone parameters

Saved color tone parameters can be deleted.

1 Click the __________2023-05-12_10.14.21.png  under the "Load Saved Color" column.

The Saved Colors screen appears.

10.png

 

2 [In the Saved Colors screen, click __________2023_05_10_120103_w_trans.png on the color parameter you wish to delete.

The relevant parameter is deleted.

11.png

Caution

Be very careful when deleting color tone parameters, as they can also be deleted by other users who have made them public in PUBLIC.

Supplement

Color tone parameters currently in use cannot be deleted.
To delete a parameter setting that is currently in use, call up another parameter setting and then delete the corresponding parameter setting.